How To Repair Hole In Car

How Practise I Patch a Pigsty in My Car?

by Darla Ferrara

Jupiterimages/Comstock/Getty Images

A hole in the body of your automobile leads to all sorts of bug regardless of what acquired information technology to announced. An bonny terminate can rust chop-chop when exposed to the harsh weather. Automotive filler, oftentimes referred to as Bondo, is plastic filler used to encompass the less than perfect areas on a car. While technically, the term Bondo refers to a production produced by 3M, the phrase has go synonymous with all types of automotive fillers. Fixing the pigsty in the trunk of your car is probably easier than you think. It just takes some nylon window screen, filler and patience.

Step i

Pull any loose medal away from the pigsty. Utilize a pair of metal snips to cutting away rusted areas. Sand the region around the hole with course sandpaper. You want to remove any paint, primer and rust. Wipe any debris from sanding off with a wet material.

Footstep 2

Cut a foursquare of nylon window screen big enough to encompass the hole without poking through. For instance, if your hole is three inches in diameter, you might need a 5 inch square of screen.

Step iii

Install the screen backside the hole using strong adhesive to secure it. Let the agglutinative dry completely before continuing.

Stride 4

Mix the hardener and the filler following the educational activity provided with the product. The substances combined create the plastic filler needed to fill up the hole. Utilize a piece of cardboard to mix the products. Stir well. The filler should be one solid color, non streaked.

Step 5

Utilise a plastic spreader to apply the filler to the pigsty. Press information technology upward against the screen and spread information technology out.

Step 6

Remove any excess filler past dragging a piece of bound steel over the surface. This volition let yous to level out the fill so that it lies flush on the surface of the car.

Pace 7

Allow the filler dry completely, it should have approximately 15 minutes. If you bear on the surface and it is nonetheless tacky, it is not notwithstanding dry.

Stride 8

Sand over the filled area using medium course sandpaper, then switch to a finer course to ensure the surface is smooth.

Step 9

Examine the patched area. Whatsoever dark spots in the filler will indicate a depression in the surface. Utilize additional filler until the surface is completely level.

Step 10

Cover the spot with automobile primer and let it dry out. Sand the primer with fine grade sandpaper one time dry.

Let the car sit for 24-hours before painting.

Tips

Writer Bio